Oil Requirements and Fault Solution of Four-Column Hydraulic Press

The four-column hydraulic press has the same requirements for industrial media, but the four-column hydraulic press often fails in work, what is the reason, and how to solve it? Let's elaborate on it below.

1. Is the four-column hydraulic press the same as the ordinary hydraulic press?

This word, in the eyes of the four-column hydraulic press manufacturer, it is the same, that is, the answer to this question, yes. Moreover, specifically speaking, it is for: there is suitable fluidity and compressibility in order to improve its transmission efficiency. In addition, there should be good oxidation resistance, rust resistance, and lubricating properties. Even if it is used for a long time, it is not easy to deteriorate.

2. Which one should be used for the working oil in the four-column hydraulic press? What are the specific requirements?

The working oil in the four-column hydraulic press, generally speaking, is to use 32 good or 46 anti-wear hydraulic oil, and the oil temperature should be controlled in the range of 15 to 60 degrees Celsius. The specific requirements are:

(1) Before the oil is injected into the hydraulic engine oil tank, it should be filtered first to avoid bringing in particle impurities, as well as dirt, etc., which will affect the normal operation of the four-column hydraulic press.

(2) The working oil should be completely replaced once a year, and the time of the first replacement should not exceed three months.

3. If the four-column hydraulic press fails, what is the reason? How to solve it?

If the four-column hydraulic press fails, the specific reason is that the electrical wiring in the hydraulic press is in poor contact, or it is connected incorrectly, at this time, it should be checked and corrected. In addition, it is possible that the amount of oil in the tank is insufficient, at this time, the oil filling operation should be carried out to make it have sufficient oil volume.